A "passive" solar house provides cooling and heating to keep the home comfortable without the use of mechanical equipment. This style of construction results in homes that respond to the environment.
For passive heating and cooling, the plan of the house, careful site selection and planning, construction materials, building features and other aspects of the home are designed to collect, store and distribute the sun's heat in winter; and to block the sun's rays in summer. Passive solar houses can be built in any architectural style and in any part of the country.
The following techniques use passive solar strategies to provide heat:
Direct Gain is radiant heat resulting from sunlight admitted directly to the living spaces through south-facing windows, which warms the interior surfaces (walls, furniture, floors, etc.). For direct gain, the south-facing window area must be sized for the climate, the type of window used and the amount of thermal mass in the home.
Graphics courtesy of North Carolina Solar Center.
Indirect Gain In a design that employs indirect gain, an attached sunspace or Trombe wall collects heat from the sun before transferring it to other spaces within the home. The air heated in a sunspace circulates naturally or with the aid of fans to other rooms.Thermal Mass is any material in the home that absorbs and stores heat. Concrete, brick, tile and other masonry materials are the most common choices for thermal mass in a passive solar home, these materials absorb and release heat slowly and are easily and inexpensively integrated into the house design. They are most effective when dark colored and located in direct sunlight. The addition of thermal mass allows saved solar energy to heat the house at night or on cloudy days. The combination increases the performance and energy-saving characteristics of the home, generally for only a modest cost increase.
Adapted from "Consumer Guide to Solar Energy," K. Sheinkopf and S. Sklar, Bonus Books, Inc. and "Buildings for a Sustainable America Case Studies," Burke Miller Thayer, American Solar Energy Society.
